logo
SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED
E-Mail manfrid@sino-matic.com TEL. 86-158-1385-6042
Zu Hause > produits > Drehtorantrieb >
DC24V Swing Gate Opener with 300KG Capacity and Manual Release for Heavy Duty Automatic Gates
  • DC24V Swing Gate Opener with 300KG Capacity and Manual Release for Heavy Duty Automatic Gates
  • DC24V Swing Gate Opener with 300KG Capacity and Manual Release for Heavy Duty Automatic Gates
  • DC24V Swing Gate Opener with 300KG Capacity and Manual Release for Heavy Duty Automatic Gates
DC24V Swing Gate Opener with 300KG Capacity and Manual Release for Heavy Duty Automatic Gates

DC24V Swing Gate Opener with 300KG Capacity and Manual Release for Heavy Duty Automatic Gates

Herkunftsort Shenzhen, China.
Markenname SINOMATIC
Zertifizierung CE/ ISO
Modellnummer PK350DC
Einzelheiten zum Produkt
Maximalgewicht des Tores:
300 KG
Maximale Torlänge:
30,0 Meter
Fernbedienungsbereich:
> 30 Meter
Herkunftsort:
China
Manuelle Freisetzung:
Ja
Maximales Belastungsgewicht:
300 kg/Blatt
Speicherbatterie:
Optional
Fernfrequenz:
433,92 MHZ
Motorleistung:
DC24V, 80W
MotorType:
Elektromotor
Grenzschalter:
Endblock
Arbeitstemperatur:
-20 ° C ~ 70 ° C.
Zahlungs- und Versandbedingungen
Min Bestellmenge
Stichprobenbestellung akzeptiert
Preis
negotiable
Verpackung Informationen
Karton/Sperrholzbox/Palette
Lieferzeit
5-10 Arbeitstage nach der Zahlung
Zahlungsbedingungen
T/T, Western Union,
Versorgungsmaterial-Fähigkeit
10.000 Stück pro Monat
Beschreibung des Produkts
DC Heavy Duty Gate Entrance Motor Automatic Gate Openers 350KG Single Leaf Swing Opener Closer
The PK350DC gate opener is designed for residential courtyard swing gate use, supporting gate leaf weight up to 300 kg and width up to 3.0 m.
Product Specifications
Warranty1 Year
After-sale ServiceOnline technical support
Project Solution CapabilityGraphic design, 3D model design, total solution for projects, Cross Categories Consolidation
ApplicationApartment
Design StyleModern
Place of OriginChina
Brand NameSINOMATIC
ModelPK350DC
Power supply220V/50Hz; 110V/60Hz
Motor power80W
Gate moving speed18~22 second per 90° (approx)
Max. single-leaf weight300Kg
Max. single-leaf length3.0M
Max. force1500N
Storage battery (optional)DC24V (4.5AH or 9.0AH)
Working temperature-20°C - +70°C
Package weight19Kg
Main Features
  • Push rod 24V DC electronic swing arm gate opener
  • Soft start slow stop function
  • Obstacle detection in opening and closing
  • Automatic close function, time is adjustable
  • Over-current function meet European safety requirements
  • Safe design to prevent PCB burned for wrong wiring connection
  • Support GSM, solar system, photocell, alarm lamp, electronic lock
  • You can add up to 23 extra remotes that can control this system
  • In case of a power outage or an emergency you may also use manual release bar
Product Application
Suitable for various public access doors, campuses, factories, office buildings, shopping malls, parking lots, etc. Enables contactless automatic door opening and closing.
Installation
PK300DC/PK350DC swing gate opener is applicable to single leaf gate weight less than 300kg, and length of the single leaf swing gate should be less than 2.5m/3m. The drive mode adopts the worm and worm gear to combine the screw rod transmission. This gate opener must be installed inside the enclosure or yard for protection.
Installation Steps
Preparation Before Main Engine Installation
  1. Before installing the door opener, please confirm the correct installation of the door to ensure that the door can be easily manually operated, and the door safety stopper can effectively prevent the door to continue moving.
  2. Install the electric lock, the distance between the door bottom and ground should be 40-50mm. If not installing the electric lock, the distance between door bottom and ground should be ≥20mm.
  3. The main engine recommended mounting height is about 300 ~ 800mm from the ground, and make sure there are reliable fixed points for mounting brackets.
Cable Installation
In order to ensure the normal operation of the door opener and protect the cable from damage, please use PVC pipe laying motor, power cable, and control cables, and separate two PVC pipes to lay (motor and power cable) and (control cable), respectively.
Mounting Brackets
In order to install the PK300DC / PK350DC main engines firmly, recommend to use the expansion screws to fix the mounting brackets.
DC24V Swing Gate Opener with 300KG Capacity and Manual Release for Heavy Duty Automatic Gates 0

Stichworte:

Schrauben-Kolben-Drehtorantrieb,

Hochleistungsöffner des tor-140W,

Auslöser Kit Swing Gate Operator

Empfohlene Produkte

Treten Sie mit uns jederzeit in Verbindung

+8615813856042
3F, Bldg B, Nr. 55 Langbei Vlg, Gemeinschaft Tongde, Baolong, Longgang, Shenzhen, 518116, China.
8615813856042
manfrid2012
+8615813856042 Wechat
manfrid@sino-matic.com
Senden Sie Ihre Anfrage direkt an uns